How do I calibrate my Braun Pro 6000?

October 21, 2020 Off By idswater

How do I calibrate my Braun Pro 6000?

  1. Remove the PRO 6000 Thermometer from the 9600 Plus Calibration Tester and read the temperature in the thermometer’s display. If the temperatures are within ±0.2 °C, the thermometer is within calibration.
  2. Apply a new probe cover.
  3. Repeated measurements in short sequence may cause higher readings.

How do you calibrate a Braun Thermoscan thermometer?

Press and hold down the «start» button. After about 8 seconds the display will show this sequence: «°C» / «°F» /… Release the «start» button when «°F» is shown. There will be a short beep to confirm the new setting, the thermometer then turns off automatically.

How do you calibrate an ear thermometer?

Reset your Smart Ear Thermometer:

  1. Slide the battery cover down then pull it away to expose the battery compartment.
  2. Remove the batteries.
  3. Wait 10 seconds.
  4. Put the batteries back in, the same as they were before.
  5. Push the button to turn on the thermometer.

Why do ear thermometers give different readings?

Differences between measurements can also result from the following factors: The thermometer is not the same temperature as the room you are measuring in (Example: it has been in a much warmer or colder room). The thermometer is inserted into the ear canal at a different depth or angle.

Why does Braun thermometer say Pos?

If the probe is placed incorrectly or was moved while taking a temperature, the device beeps, the green ExacTemp light goes out and POS (Position Error) displays.

Do ear thermometers need to be calibrated?

A digital ear thermometer is the easiest way to measure temperature. But from time to time, an ear thermometer will require re-calibrating due to its usage. So, it’s essential to know how to calibrate an ear thermometer to get accurate temperature readings.

How accurate is the Braun ThermoScan?

It not only registered between 97.9 and 98.6°, it did so consistently, AND kept a running tab. It was actually more accurate than the old oral thermometer which was off by as much as 3 degrees (maybe the mercury is tired, but more likely it varied with the 3-5 minutes that was bearable to get a reading).

Do you add a degree for ear temp?

Despite what people may tell you, you don’t have to add or subtract a degree when using a temporal thermometer or ear thermometer. Simply report the temperature to the pediatrician, and let the doctor know the type of thermometer you used.

How do I fix the POS error on my Braun thermometer?

The POS error means that the thermometer probe was not positioned correctly in the ear and an accurate reading was not possible. If this does not work, it is recommended to replace and move the lens filter again and then press Start to start a new measurement.

Can a Braun Thermoscan Pro 6000 be calibrated?

The Braun Thermoscan® PRO 6000 Ear thermometer cannot be calibrated in the field.The calibration check is only used to determine that the thermometer measurements are accurate within the specified tolerances across the measurement range. 3.1 Service tool

What does the Braun Pro 6000 ear thermometer do?

The Braun ThermoScan® PRO 6000 Ear thermometer is a clinical grade ear thermometer that in normal operation mode displays an estimate of oral temperature. It is indicated for the intermittent measurement of human body temperature in patients of all ages in a professional use environment.

Who is the manufacturer of the Pro 6000 thermometer?

PRO 6000 Ear thermometer Service documentation This product is manufactured by Kaz USA, Inc. under license to the ‘Braun’ trademark. ‘Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany. ThermoScan is a registered trademark of Helen of Troy Limited and its af\liates. 31IMP6SM190 REV8 16JUN15PRO 6000 1 1.0 Scope