How much can 6×6 post support?

September 7, 2020 Off By idswater

How much can 6×6 post support?

The load capacity of a 3-foot #2 grade 4×4 is 17,426 pounds, and a similar 6×6 is 20,834 pounds or 16% better. However, an 8-foot 4×4 supports 6468-pounds and 2339-pounds at 14-feet, while a 6×6 is 18032 and 10550-pounds respectively – or 64% and 78% more load capacity.

What size screws 6×6 post?

This 6×6 post base requires the following fasteners for installation: (1) – 5/8” concrete anchor, (12) – 16d x 3-1/2” Common Nails or (2) – ½” Machine Bolts (Use nails OR bolts.

How long will a treated 6×6 post last in the ground?

5 Answers. A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don’t let the PT post come in contact with the ground.

How deep should a 6×6 post be in the ground?

In general, the holes should be at least 3 feet deep for posts that protrude 8 feet or more above the level. Inserts that extend 6 feet above the ground should have holes that are at least 2.5 feet deep.

How far should screws go into wood?

The most important factor in screw selection is length. The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw’s diameter, or gauge.

How far should a screw penetrate wood?

This pilot hole should be deep enough so that it penetrates the wood a distance of about one-half to two-thirds of the screw’s threaded length. If you are planning to countersink the screw head, a third hole, equal to the diameter of the head, will be needed at the surface.

What do you use to fasten a 6×6 post base?

Fasten using Nails or Bolts – Use only the specified fasteners below. This 6×6 post base requires the following fasteners for installation: (1) – 5/8” concrete anchor, (12) – 16d x 3-1/2” Common Nails or (2) – ½” Machine Bolts (Use nails OR bolts.

How big is a 6 in.post protector?

Download a free copy from the Adobe Web site. Post Protector6 in. x 6 in. x 42 in. In-Ground Post Decay Protection How can we improve our product information? Provide feedback. The ones I bought were 12′ and the longest ones that Home Depot sold. They were 117.96 each Can this be used indoors? If not then which one? Is it needing to be sanded?

What kind of nails do you use for a 6×6 post base?

This 6×6 post base requires the following fasteners for installation: (1) – 5/8” concrete anchor, (12) – 16d x 3-1/2” Common Nails or (2) – ½” Machine Bolts (Use nails OR bolts. DO NOT install nails and bolts together!)

Where can I get 6×6 post brackets for free?

6×6 – Post Bases – Post Brackets – The Home Depot Get free shipping on qualified 6×6 Post Bases or Buy Online Pick Up in Store today in the Building Materials Department. #1 Home Improvement Retailer