What engine came in a 64 Mustang?

November 19, 2019 Off By idswater

What engine came in a 64 Mustang?

1964½–1966

Mustang 1964½–1966
Engine 170 cu in (2.8 L) Thriftpower I6 200 cu in (3.3 L) Thriftpower I6 260 cu in (4.3 L) Windsor V8 289 cu in (4.7 L) Windsor V8 289 cu in (4.7 L) Windsor HiPo V8
Transmission 3-speed manual 4-speed manual 3-speed automatic
Dimensions
Wheelbase 108 in (2,743 mm)

How much HP does a 260 V8 have?

The 260 Windsor was standardized in most full-size Ford sedans in 1963 and was even featured in early models of the legendary 1964 Ford Mustang. Special editions of the Ford Falcon, Mercury Comet, and AC Cobra cars with the 260 engine could reach 260 horsepower at 5800 rpm and a torque of 269 at 4800 rpm.

How can you tell the difference between a 260 and a 289?

The main difference between a 260 and a 289 is the 260 has a 6 inch space between the motor mount bolt holes, while the 289 has a 7 inch space. All 260 engines have a 5-bolt bellhousing bolt pattern. The 1963 and 1964 1/2 289 engines have the same 5-bolt pattern. The 260 has a smaller cylinder bore.

Is Ford 260 a V8?

In 1964, it again saw service in the Shelby Cobra, the Mercury Comet, the Ford Fairlane, and the Ford Falcon. Finally, the little v8 was installed in the newly introduced Mustang in April 1964 and was offered only until August. The 260 was an overhead valve 90 Degree V8 engine and a good performer.

What size motor is a Mercruiser 260?

Mercury Diesel: TDI 3.0L (150-260hp)

Power mhp / kW 260 / 191
Engine type V6
Displacement (L) 3.0
Dimensions (L x W x H) 35 x 32 x 34″ / 927 x 813 x 853 mm
Weight (engine only) 675 lbs / 306 kg

How do I identify a Ford 260 engine?

The older 221 and 260 Ford small-blocks are easily identified. According to MRE-Books, these two engines use a five-bolt bell housing and are stamped with the casting code “C2OE” or “C3OE.” All Ford small-block casting codes are located on the right side of the engine block just above the starter.

What is a 64 and a half Mustang worth?

Prices of 1964 1/2 Mustang hardtops range in price from about $6,000 to $25,000, with the average value being $18,000.

What’s the value of a 64 Mustang?

Prices of 1964 1/2 Mustang hardtops range in price from about $6,000 to $25,000, with the average value being $18,000. Certain options such as a four-speed transmission increase its value $1,000 and if it has 289/271hp V-8, add another 30 percent.

What kind of engine did the 1964 Mustang have?

The 64 1/2 convertibles had a 289cid engine, and the hardtops came with the less powerful 260 V-8. Thirty five convertibles were sold to dealerships and 195 hardtops were given out in dealer contests held in April of 1964. Clearly the new Ford Mustang was suddenly everywhere!

What was the horsepower of a 1962 Ford Mustang?

It was an enlarged version of the previous 221 CID V8 that Ford used in previous cars and the 260 had 164 horsepower. In 1962, it was used in the Shelby Cobra, the Mercury Comet and the Ford Fairlane.

When did the Ford 260 engine come out?

1962 – Used in the Shelby Cobra, the Mercury Comet and the Ford Fairlaine. 1963 – Used in the Shelby Cobra, the Mercury Comet, the Ford Fairlane, the Ford Galaxy, and the Mercury Meteor 1964 – Used in the Shelby Cobra, the Mercury Comet, the Ford Fairlane, and the Ford Falcon.

How many Mustangs were sold in the US in 1964?

Thirty five convertibles were sold to dealerships and 195 hardtops were given out in dealer contests held in April of 1964. Clearly the new Ford Mustang was suddenly everywhere! It was even featured in 1964’s Bond movie, Goldfinger! Yes, the Mustang was an instant hit! A true royal gem in Ford’s car making history.