FIL-TREK

Fil-Trek Products for Chemical/Water Applications - Filter Bags, Filter Cartridge

CHEMICAL/WATER APPLICATIONS - FILTER BAGS (AQ)

500 Series Bags

• Constructed of polypropylene material with a stainless steel ring.
• Retention ratings from 2.5 to 32 m at 97%.
• Contains over 30 square feet of usable filter media.
• Can absorb unwanted traces of oils.
• 500 Series bags are suited for Fil-Trek BMB SL & TL housings
• 500 Series bags fit most major competitive housing models
• Effective at removing both solids & gelatinous particles.
• Melt blown micro fibers allow the capture of very fine particulate at high efficiencies.
• 500 series bags are a high performance alternative to filter cartridges.
• Filtration media equivalent to 7 standard bags.
• 500 series bags will hold from 15-25 times the bags own weight.
• Complies with FDA regulations governing food and beverage contact.
• Free of any potentially damaging silicone oils.

Deep Pleated Series - 6`` Pleated cartridges

• Absolute rated 600 series liquid filter cartridges.
• Suited for high flow applications where absolute particle removal is required.
• 99% removal from 1 to 40 microns.
• Inside out flow (internal dirt holding).
• External protective media cage & internal support core.
• All Deep Pleated filter elements are FDA compliant.
• Each element will replace up to seven 500 series bags.
• Each element will replace up to twenty 100 series bags.
• Distinctive element design provides 35 square feet of surface area.
• Efficiency & dirt holding capacity is maximized by pleating several different filter media in a single pleat pack (lowest cost per pound removal).
• Unique design of this pleated element provides a large effective surface area that will fit into any standard size two filter basket.
• Built in handle makes filter change out fast, easy & safe.
• Fil-Trek o-ring seal assures filtration integrity.
• Thermal bonded end caps prevents particle bleed through and unloading that occurs in standard bags & wound elements.
• The high surface area provides lower pressure drops and allows for extended service life.
• Unique construction reduces disposal volume & cost.
• Depth filter elements are suited for Fil-Trek BMB, SL & TL series filter housings.

ECO-Flow Single Layer Bag

• Cost effective single layered size one & size two filter bags.
• Retention ratings from 1 to 200 m at 90%.
• All industry standard sizes available
• Sewn & welded bags available.
• Excellent for pre-filter applications
• Single layer bags are suited for Fil-Trek BMB SL & TL filter housings
• Single layer bags fit most major competitive housing models

High Performance POMF Bags

• High performance multi-layered size one & size two filter bags.
• Retention ratings from 1 to 25 m.
• Absorbs unwanted trace oils.
• Excellent for pre-filter applications
• Holding capacities from 10 – 20 times the filter weight.
• Multi-layer bags are suited for BMB, SL, EB & TL filter housings
• POMF high performance bags fit most major competitive housing models

CHEMICAL/WATER APPLICATIONS - FILTER CARTRIDGE VESSELS (AQ)

BH Series - Single Round Cartridge Vessel
EF High Flow Series - Multi Round Cartridge Vessels
EF Low Flow Series - Multi Round Cartridge Vessels
FSO High Flow Series - Multi Round ASME Cartridge Vessels
FSO Low Flow Series - Multi Round ASME Cartridge Vessels
GL High Flow Series - Multi Round ASME Cartridge Vessels
GL Low Flow Series - Multi Round ASME Cartridge Vessels
GLH High Flow Series - Horizontal ASME Cartridge Vessels
GLH Low Flow Series - Horizontal ASME Cartridge Vessels
HPI High Flow Series - High Purity Multi Round Cartridge Vessels
HPI Low Flow Series - High Purity Multi Round Cartridge Vessels
Lined Series - Lined Cartridge Housings
LM Series - Single Round Cartridge Vessels
Max Flow Housings - Multi-Round Housings
Max Flow Housings - Single Round Housings
Sanitary Filter Housings
SSI Series Housing - Single Round Sanitary
Ultra Flow Housings - Multi round vessels

• Ultra Flow multi round ASME designed filter housings.
• Accepts multiple 6``OD x 52``lg pleated Ultra Flow cartridges (70 sq.ft).
• Will also accept 6``OD x 26``lg Deep Pleated cartridges (35 sq.ft).
• Element flow inside out with excellent dirt holding capacity.
• 150psig (10.3bar) @ 250ºF(121.1ºC) operating pressure standard.
• Vessels available in carbon or stainless steel 304 or 316.
• Swing bolt closure allows for quick element change out.
• Each Ultra Flow element will replace up to 10 standard 2 ½`` elements.

• Ultra Flow single round ASME designed filter housings.
• Accepts single 6``OD x 52``lg pleated Ultra Flow cartridges (70 sq.ft).
• Will also accept 6``OD x 26``lg Deep Pleated cartridges (35 sq.ft).
• Element flow inside out with excellent dirt holding capacity.
• 150psig (10.3bar) @ 250ºF(121.1ºC) operating pressure standard.
• Vessels available in carbon or stainless steel 304 or 316.